Hi, I know some bits about zaptel.conf and zapata.conf but
problem is modules wctdm, wcfxo, wcfxs are not getting loaded. modprobe zaptel is successful! Regards, Somesh S. Shanbhag --- Tzafrir Cohen <[EMAIL PROTECTED]> wrote: > On Sun, Sep 25, 2005 at 11:50:06PM -0700, somesh s > wrote: > > Hi, > > > > I got the following output when I run the command. > > > > >>>>>>>>>>>>>>> genzaptelconf -svd > >>>>>>>>>>>>>>>> > > > > ./genzaptelconf: line 616: /etc/init.d/asterisk: > No > > The script assumes that there is an > /etc/init.d/asterisk script. > > Please stop asterisk manually. > > > such file or directory > > Unloading zaptel modules: > > wcusb zaptel > > Test Loading modules: > > - zaptel > > - zaphfc > > - qozap > > Hint: insmod errors can be caused by incorrect > module > > parameters, including > > invalid IO or IRQ parameters. > > You may find more information in syslog or > the > > output from dmesg > > - wctdm > > Hint: insmod errors can be caused by incorrect > module > > parameters, including > > invalid IO or IRQ parameters. > > You may find more information in syslog or > the > > output from dmesg > > - wcfxo > > Hint: insmod errors can be caused by incorrect > module > > parameters, including > > invalid IO or IRQ parameters. > > You may find more information in syslog or > the > > output from dmesg > > - wcfxs > > - pciradio > > Hint: insmod errors can be caused by incorrect > module > > parameters, including > > invalid IO or IRQ parameters. > > You may find more information in syslog or > the > > output from dmesg > > - tor2 > > Hint: insmod errors can be caused by incorrect > module > > parameters, including > > invalid IO or IRQ parameters. > > You may find more information in syslog or > the > > output from dmesg > > - torisa > > Hint: insmod errors can be caused by incorrect > module > > parameters, including > > invalid IO or IRQ parameters. > > You may find more information in syslog or > the > > output from dmesg > > - wct1xxp > > Hint: insmod errors can be caused by incorrect > module > > parameters, including > > invalid IO or IRQ parameters. > > You may find more information in syslog or > the > > output from dmesg > > - wct4xxp > > Hint: insmod errors can be caused by incorrect > module > > parameters, including > > invalid IO or IRQ parameters. > > You may find more information in syslog or > the > > output from dmesg > > - wcte11xp > > - wcusb > > - ztd_eth > > It tries and fails to load many modules. This is > expected, as you don't > have their hardware. > > However can you load any zaptel module using > modprobe? > What's the output of: 'lsmod | grep zaptel' > > BTW: if you have a good idea of what should be in > zaptel.conf and > zapata.conf, I figure you should write them manually > and not waste too > much time on that automated script. It is meant to > save time, not to > spend time. > > > Updating '/etc/default/zaptel' > > Generating '/etc/zaptel.conf' > > Generating '/etc/asterisk/zapata-channels.conf' > > Reconfiguring identified channels > > > > Zaptel Configuration > > ====================== > > > > > > Channel map: > > > > > > 0 channels configured. > > > > ./genzaptelconf: line 653: /etc/init.d/asterisk: > No > > such file or directory > > Checking channels configured in Asterisk: > > ./genzaptelconf: line 665: asterisk: command not > found > > > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > > > > What may be the problem? Help me in this regard. > > > > Regards, > > Somesh S. Shanbhag > > > > --- Tzafrir Cohen <[EMAIL PROTECTED]> wrote: > > > > > On Sun, Sep 25, 2005 at 10:42:52PM -0700, somesh > s > > > wrote: > > > > Hi, > > > > > > > > Can you please give me some details about the > link > > > > you have sent? I am not aware of what it does? > > > > > > > > [http://tzafrir.org.il/genzaptelconf] > > > > > > It is a bash script for generating zaptel.conf > and > > > zapata.conf according > > > to the current settings. > > > > > > To use it: > > > > > > wget http://tzafrir.org.il/genzaptelconf > > > bash genzaptelconf -h # gives help > > > > > > Try -s and -v . -d is probably not recommended > if > > > you have more thn one > > > card, I figure. > > > > > > > > > > > > > > Regards, > > > > Somesh S. Shanbhag > > > > > > > > --- Tzafrir Cohen <[EMAIL PROTECTED]> > wrote: > > > > > > > > > On Fri, Sep 23, 2005 at 06:22:06AM -0700, > somesh > > > s > > > > > wrote: > > > > > > Hi Steve, > > > > > > > > > > > > This is zaptel.conf. Can you please tell > me if > > > you > > > > > > > > > > > require to see more conf files? > > > > > > > > > > > > [zaptel.conf] > > > > > > loadzone = us > > > > > > defaultzone=us > > > > > > fxoks=1-2 > > > > > > fxsks=3-4 > > > > > > > > > > http://tzafrir.org.il/genzaptelconf > > > > > > > > > > Should auto-detect zaptel.conf settings. > Just in > > > > > case you're not sure. > > > > > > > > > > -- > > > > > Tzafrir Cohen | > > > [EMAIL PROTECTED] | > > > > > VIM is > > > > > http://tzafrir.org.il | > === message truncated === ______________________________________________________ Yahoo! for Good Donate to the Hurricane Katrina relief effort. http://store.yahoo.com/redcross-donate3/ _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users