Hi,
The only reason I have an 'Answer' is because of the delay, the PBX cuts
the call even before the SIP starts ringing, so the call is half only,
i.e the SIP user answers but the PBX has already dropped the call. So
the Answer stopped this from happening.
I still need help on the delay
Hi,
Try taking out "Answer" in your extensions.conf.
You don't need to answer before dialing a SIP channel.
cheers.
AK
On 9/28/05, yusuf <[EMAIL PROTECTED]> wrote:
Hi all,
I am using Asterisk CVS, and I am getting a huge delay in dialing SIP.
This Asterisk box is taking calls from a PABX over ZAP, then dialing SIP
users.
So, a user '0251' dials from his phone, the PABX sends it the my
Asterisk box, no delay, then I get a 15 sec delay, before it actually
dials the end SIP user.
1 -- Accepting call from '0251' to '0834541083' on channel 0/1, span
2 -- Executing NoOp("Zap/1-1", "0834541083") in new stack
3 -- Executing Answer("Zap/1-1", "") in new stack
4 -- Executing Dial("Zap/1-1","SIP/[EMAIL PROTECTED]:5060")in
5 new stack
6 -- Called [EMAIL PROTECTED]:5060
7 -- SIP/192.168.11.111:5060-1699 is ringing
8 -- SIP/192.168.11.111:5060-1699 is ringing
9 -- SIP/192.168.11.111:5060-1699 is ringing
When the call is placed, Asterisk executes until Line 5. There is a 10
-15 sec delay between Line 5 and Line 6. Once Line 6 has executed, only
then does it dial
Can anyone help
yusuf
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
