Anders Svensson wrote: > I have a problem. Incoming calls work without problem but I cant call > out. Using AAH.Gets a busy tone > > Anyone who can see a mistake in Outgoing settings > > > > > context=from-pstn > host=ipkund1.rixtelecom.se > insecure=very > nat=yes > secret=xxxxxxxxxxx > type=peer > username=0406082250 > "username" is one of the most misunderstood settings in sip.conf and it's really a bad, bad, bad name. You want to set fromuser and fromdomain together with username.
"username" has many uses, which is bad: * One is to set a default user name that is used in combination with default IP when we have no registration from a local peer. * The other use is what you are trying to set up: to set authentication username when we register and place calls to an outbound service provider. This is always used in combination with "fromuser" and "fromdomain". The nat=yes setting seems redundant, it should be done on Rix telecom's side. When you set nat=yes you tell asterisk that the *other end* is behind nat. I do not believe a service provider run a service behind NAT. Good luck! Lycka till! /Olle _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users