You can't put four span in timing, because only one must be like nmaster sincronization. If one of your telco provide time for your card. Put second value in all span to 0.
regards, srsergio -----Mensaje original----- De: Ronald Hartmann [mailto:[EMAIL PROTECTED] Enviado el: martes, 04 de octubre de 2005 14:33 Para: asterisk-users@lists.digium.com Asunto: [Asterisk-Users] Quad PRI Problems I have been getting quite a bit of PRI Resets using my Quad PRI Digium card. Prior to the resets I am getting similar notices to the following chan_zap.c:7482 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 3 Telco claims the PRI's are fine on their end and that it is my unit. Is this timing? (google somewhat leads to this) I am running 1.08 asterisk zaptel libpri. Any help would be greatly appreciated. ~ron Zaptel.conf span=1,1,0,esf,b8zs # connects to an Adtran FXS TA624 e&m=1-24 span=2,1,0,esf,b8zs # Connects to Bell Company 1 bchan=25-47 dchan= 48 span=3,1,0,esf,b8zs # Connects to Bell Company #2 bchan=49-71 dchan= 72 span=4,1,0,esf,b8zs # Connects to Brook Trout CArd e&m=1-4 defaultzone=us loadzone=us [channels] context=from-internal-receiver ; Points to the default context of your extensions.conf language=en faxdetect=none usecallerid=yes callerid=asreceived threewaycalling=yes transfer=yes signalling=featd ; FXS for ringing phones group=0 flash=350 rxwink=300 prewink=20~~ echocancel=no ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=no immediate=no channel => 1-24 signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master switchtype=national pridialplan=unknown echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=no echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds group=1 context=from-pstn channel => 25-47 ; Set this to 1-15,17-31 for E1 group=2 signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master switchtype=national channel => 49-71 ; Set this to 1-15,17-31 for E1 group=3 signaling=em_w channel => 73-76 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users