www.voip-info.org > Another trivial question: > > Is there a "place" where all the parameters are documented ? > In example (my example!) I would like to know the meaning of a lot of > parameter that can be used in sip.conf, > > A lot of these keywords are intuitive keywords (i.e. NAT=YES/NO;PORT=5060; > context=xxxxx) but other are not (at least for me) > i.e.: > > type = peer, friend > insecure=very > host=dynamic > > and so on. > > At last, my need is: > > Accept a non-registerd sip-strem from a well known ip address (and only > from that ip address....) > > I tried to add a > > [testsip] > ;username=testsip > type=friend > ;secret=testsip > qualify=no > port=5060 > nat=no > host=x.y.z.w > dtmfmode=rfc2833 > context=from-internal > canreinvite=no > callerid="test sip " <testsip> > > that would work if the sip would be registered. But the SIP client is not > able to register. > > I solved using the > context = from-sip-external ; Send unknown SIP callers to this context > > and it works, but I have no more the control about who is sending me SIP > stream (anybody now can use my asterisk box...) > > any help will be greatly appreciated > > Andrea
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users