Hi list, I have a "Wildcard TDM400P REV I Board 1" with 4 FXO modules and * 1.0.9 up-and-running.
Only 2 FXO ports are used for 2 analog phones and are doing fine. I now wanted to use the 3rd and 4th port, but when I insert an analog phone, take it off hook, I do not get a dial tone. With my 1st and 2nd port, I get messages like: -- Starting simple switch on 'Zap/13-1' -- Hungup 'Zap/13-1' on my CLI, but with port 3 and 4, I don't see anything. I have tried with the same phone that works well in port 1 and 2, so it's not related to the phone. The configuration for port 3 and 4 is idential to 1 and 2. zap show channel xx does not show anything special and what it show is identical between port 1,2 and 3,4. It's a production system, so it's not easy to stop and start troubleshooting it, certainly not easy to open and swap modules.... Anybody seen something similar ? Thank Alex -- NEW: aXs GUARD hands-on Trainings v.7.0 more info at http://www.axsguard.com/indextraining.htm aXs GUARD has completed security and anti-virus checks on this e-mail (http://www.axsguard.com) --------------------------------------------------- Able NV: ond.nr 0457.938.087 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users