Sounds like a timing issue or interop issue. Get rid of the NFAS (3rd t1 with all B channels) and make them all plain PRIs without D channel sharing.
Jason Walker <[EMAIL PROTECTED]> wrote:
I have looked through other postings to the user group for HDLC errors, went through what worked for other people, and still can not seem to get past this issue.For 3 days, I have been getting HDLC abort(6) errors in *. Prior to Tuesday, the circuits were clean...I had maybe 10 HDLC abort messages since August 10th.Here are my specs:1 Gig IBM x300 w/ 1 Gig Ram1 Quad TE405P cardNo errors on IRQsIRQs are separated with NO sharinghdparm for irq and dma are set to 'on'Software -FC1 with -1 updates to kernel, etc.Asterisk v 1.0.9, libpri 1.0.9, zaptel 1.0.9.21 T1 is a tieline to our Nortel Meridian3 T1s are a PRI trunk group with D chans on 24 and 48. The third T1 only has b channels.No alarms from zttool.Calls go through, inbound and outbound.About every 5 seconds, I get the following on the console:Nov 4 21:10:37 NOTICE[9693]: PRI got event: Alarm (4) on Secondary D-channel of span 1
Nov 4 21:10:37 NOTICE[9693]: PRI got event: HDLC Abort (6) on Primary D-channel of span 1The errors seem to increase as calls come in and out. There is also a noticable "popping" when the error happens.Any suggestions are welcome.thank youJason_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Yahoo! FareChase - Search multiple travel sites in one click.
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users