This will not work. The PRI uses a single D channel for signalling.
It can only go to one PBX, either * or legacy. Yes the cisco can map
DS0 between the E1, but I believe you need the VWIC-MFT series to do
so (may be wrong on that) but that will definately break the PRI.
Either run the PRI directly to the legacy as is and add another from
legacy to *, or connect the PRI to * and add a second from * to legacy.
Good Luck
On Nov 9, 2005, at 3:53 AM, Marco Supino wrote:
Hi,
I want to build a PRI pass-through with a Cisco 2600, with two VWIC
E1 cards, is this possible ? and do i need any other modules except
for the E1 modules ?
What i want to do is connect the asterisk to the PRI through the
Cisco router, and let my legacy PBX utilize some of the PRI
channels while testing Asterisk,
Anyone with experience, sample configs or idea, please contribute.
Thanks.
Marco.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
