On Sat, 2003-10-04 at 12:02, Lists wrote: > But would you then not be able to use caller id from the telco?
CallerID on an analog line is sent between the first and second ring normally. So if the requester wants callerid and first ring answer, he will have to move to PRI. Some choices have drawbacks, of course PRI is usually just cost. > On Sat, 4 > Oct 2003, Martin Pycko wrote: > > > Yeah, I'd put usecallerid=no since I bet it's set by default as yes. > > > > Martin > > > > On Sat, 4 Oct 2003, Richard Scobie wrote: > > > > > > > > > > > Martin Pycko wrote: > > > > take out usecallerid=yes in zapata.conf > > > > > > > > Martin > > > > > > > > > > > > > Thanks Martin, but my zapata.conf is : > > > > > > [channels] > > > echocancel=yes > > > echocancelwhenbridged=yes > > > busydetect=yes > > > busycount=6 > > > context=incoming > > > signalling=fxs_ks > > > group=1 > > > channel => 1-2 > > > > > > Perhaps I need a usecallerid=no in there. I'll test this when I'm back > > > at work. I have not changed this prior to rebuilding the source. > > > > > > Regards, > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
