RE: [Asterisk-Users] Sipura SPA-3000 setup in Brazil

[Ossi Sariola]

Paul,   I have been using a SPA-3000 here in São Paulo, and after some tweaking it is working ok.   I do recall that I had to set some line parameters due to the differences, but I need to open the configs of the ATA again…   Meanwhile, if you have any additional info let me know, I might be able to help…   Cheers,   oZ       ----- Original Message -----   From: Paul Davidson   To: Asterisk Users Mailing List - Non-Commercial Discussion   Sent: Wednesday, October 05, 2005 8:25 PM   Subject: [Asterisk-Users] Sipura SPA-3000 setup in Brazil       All-     I'm attempting to set up a Sipura SPA-3000 in Sao Paolo, Brazil.  Not being a portuguese speaker, I'm having a rough time of finding the relevant information on how to make the thing pick up the PSTN line and make an outbound call.     The sipura in question works fine on a bench connected to a POTS line in the US, but is now plugged in in Sao Paolo.  The immediate thing I notice is that the voltage is high by US standards- 66v, as opposed to 48.  But no combination of settings will seem to make it work properly- attempted outbound calls generate dead air.  A brazilian POTS phone hooked up to the FXS port on the unit works just fine- I can ring it, and it can call into Asterisk.     Am I barking up the wrong tree, and does the device have to be different for it to work in Brazil, or is there some magic I need to apply to the Sipura config to make it work?     Any previous experience shared would be welcomed, and eventually, published on the wiki.     -pbd

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users