On Tue, 15 Nov 2005, Lee Archer wrote: > I could do without playing with multiple versions of drivers trying to > find one that works. And I could do with not spending days trying to > make the card work with the ISDN lines.
Yes, you could do that, but it is not fun ;-) > Bascially I could do with a > card which has linux 2.6 drivers, works with Asterix and is documented. Well, Diva Server cards from Eicon do have our latest driver in kernel 2.6. Only if you need support for newer cards (e.g. new PRI or 4PRI), then you can use an RPM from Eicon with new driver. Also, I use 4BRI with Asterisk at home and in our company. I even use it as an embedded project (diskless boot and runs completely in RAM, a designated small server for Asterisk/ISDN jobs only, without Debian,SuSe,etc installed and created with ELinOS -> www.elinos.com)... So I guess I could say "it works". For 'documented', I cannot offer a book, but samples, README, Wiki and of course this mailinglist have everything you need. Armin > Regards > > Lee > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: 15 November 2005 09:26 > To: Lee Archer > Cc: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] ISDN card required > > Less hassle? Then I would recommend the Eicon Diva Server Cards. > Active cards with full support for any ISDN line protocol, Modem, Fax > and support with Asterisk via a generic channel driver (chan_capi, > tested with other cards too). > How less hassle do you need? > > Armin > > On Tue, 15 Nov 2005, Lee Archer wrote: > > For us it boils down to the card with the less hassle. Anyone used > > this sirrix quad card? > > > > Regards > > > > Lee > > > > ________________________________ > > > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Rob Lith > > Sent: 14 November 2005 18:24 > > To: Asterisk Users Mailing List - Non-Commercial Discussion > > Subject: Re: [Asterisk-Users] ISDN card required > > > > > > Junghanns is a very good card, Sirrix (www.sirrix.de) also do a good > > card with its own channel driver - saves hassels with BRIstuff needed > > with Jungahnns. In the end its down to personal preference. Sirrix > > comes in quad version, Junghans in quad and octo. > > > > Regards > > Rob > > > > > > On 11/14/05, Klaus Darilion <[EMAIL PROTECTED]> wrote: > > > > Kristof Hardy wrote: > > > Lee Archer wrote: > > > > > >> Can anyone point me in the direction of a quality, works with > > > > >> Asterisk, BRI card. I need minimum 2 port/4 channel. > > > > > > > > > Ack. Like Mark pointed out, I also used Junghanns.net cards, > works > > fine. > > > > Hi Kristof! > > > > (sorry for the empty email) > > > > Do you use it with asterisk 1.2 (CVS)? AFAIK the bristuff > package for > > 1.2 is quiet out-of-date. > > > > btw: have you ever used chan_misdn from beronet with quadBRI > cards? > > Any > > experiences? > > > > regards > > klaus > > _______________________________________________ > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
