Hello Kevin ,
On Wed, 16 Nov 2005, Kevin Hanson wrote:
Steven Ringwald wrote:
I apologize if this question has been asked before. Did something change
with the behaviour of the 'sip show inuse' command between 1.0.9 and
1.2-rc1? I used to be able to see a list of extensions and the number of
in/out calls. Now it just reports:
asterisk*CLI> sip show inuse
* User name In use Limit
* Peer name In use Limit
no matter how many calls are being used.
asterisk*CLI> sip show channels
Peer User/ANR Call ID Seq (Tx/Rx) Form Hold Last
Message
192.168.70.128 1234 339ad96826e 00102/00000 ulaw No Tx:
ACK 192.168.70.116 1235 723e1612-52 00101/00002 ulaw No
Rx: ACK 2 active SIP channels
Any info about getting the previous functionality back would be greatly
appreciated.
Steve
I think you have to have call-limit set in sip.conf. I had the same problem,
then set call-limit=10 and 'sip show inuse' worked.
Did that on a cvs pull ...
Asterisk CVS HEAD built by [EMAIL PROTECTED] on a i686 running Linux on
2005-10-31 23:09:39 UTC
I get the same response from 'inuse' as Steven does even with the
addition of the 'call-limit=' in sip.conf .
Any other suggestions ? Tia , JimL
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 3542 Broken Yoke Dr. | Give me Linux |
| [EMAIL PROTECTED] | Billings , MT. 59105 | only on AXP |
+------------------------------------------------------------------+
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
