The problem is that my IAX softphone only receives calls sporatically.
I am using both Firefly and Diax (not at the same time!) to connect from inside my office network (behind NAT) to my Asterisk (1.0.9) box in my home (behind NAT.) The softphone registers as an extension no problem and originates calls perfectly. The problem is that incoming calls to Asterisk frequently do not ring my softphone although instructed to by the dial command. My gut tells me that this is a timing issue and that the office firewall is closing the connection just before the call comes in.
Can the frequency of the keep-alive packets be increased?
Below is the output of the CLI. gcleaves is the name of the IAX2 softphone extension. The output says "Called" but the phone does not ring. The other two extensions are on the same network as Asterisk and ring just fine.
Any ideas?
-- Accepting AUTHENTICATED call from 192.xxx.xx.xx, requested format = 4, actual format = 4
-- Executing Dial("IAX2/[EMAIL PROTECTED]:4569/2", "SIP/cordless&SIP/telefonica1&IAX2/gcleaves|20|tThH") in new stack
-- Called cordless
-- Called telefonica1
-- Called gcleaves
-- SIP/telefonica1-52dd is ringing
-- SIP/cordless-d992 is ringing
-- Registered 'gcleaves' (AUTHENTICATED) at 6x.xxx.xxx.xx:37642
-- Nobody picked up in 20000 ms
I am using both Firefly and Diax (not at the same time!) to connect from inside my office network (behind NAT) to my Asterisk (1.0.9) box in my home (behind NAT.) The softphone registers as an extension no problem and originates calls perfectly. The problem is that incoming calls to Asterisk frequently do not ring my softphone although instructed to by the dial command. My gut tells me that this is a timing issue and that the office firewall is closing the connection just before the call comes in.
Can the frequency of the keep-alive packets be increased?
Below is the output of the CLI. gcleaves is the name of the IAX2 softphone extension. The output says "Called" but the phone does not ring. The other two extensions are on the same network as Asterisk and ring just fine.
Any ideas?
-- Accepting AUTHENTICATED call from 192.xxx.xx.xx, requested format = 4, actual format = 4
-- Executing Dial("IAX2/[EMAIL PROTECTED]:4569/2", "SIP/cordless&SIP/telefonica1&IAX2/gcleaves|20|tThH") in new stack
-- Called cordless
-- Called telefonica1
-- Called gcleaves
-- SIP/telefonica1-52dd is ringing
-- SIP/cordless-d992 is ringing
-- Registered 'gcleaves' (AUTHENTICATED) at 6x.xxx.xxx.xx:37642
-- Nobody picked up in 20000 ms
Geoffrey Cleaves
Skype: gtcleaves
Yahoo! Messenger: gcleaves
IAX: iax:[EMAIL PROTECTED]/gcleaves
FWD: 697925
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
