Hi all,
I'm trying to configure a remote user with a DrayTek 2600Vgi. The setup looks like this. [SIPphone]--[Asterisk]--[Firewall]---[VPN]---[DrayTek]--[Analog-phone] I can place calls to the DrayTek and recieve calls from the analog phone. However, the calling party does not hear the called party (one way audio). The audio for the remote user works fine. VPN works fine too and i have no drops in my fw-logs. my sip.conf looks like this. (ext 2005 is my DrayTek and ext 2006 is the local sip user) [general] context=default port=5060 bindaddr=0.0.0.0 srvlookup=yes [2006] type=friend callerid="OptiPoint600" <2006> context=international host=dynamic user=2006 secret=xxxxx dtmfmode=rfc2833 disallow=all allow=alaw allow=ulaw [2005] type=friend canreinvite=no host=dynamic user=2005 secret=xxxxx dtmfmode=rfc2833 callerid="Draytek" <2005> context=international disallow=all allow=alaw allow=ulaw i try to play around with externip, localnet, nat and canreinvite but still have the same issue. Sporadically i can see a Maximum retries exceeded on call ... for seqno 102 (Non-critical Request on the CLI. I have also replaced the analog phone with a softclient on my laptop connected behind the vigor, but have the same problem. Has anybody managed to get a similar setup running? any ideas, suggestions are wellcome... thx in advance... richard. __________________________________ Yahoo! FareChase: Search multiple travel sites in one click. http://farechase.yahoo.com _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users