It is. Darn!
--Jim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Darren Wright Sent: Wednesday, November 23, 2005 8:48 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Help need to reset Adit 600 for Asterisk install What about telnet access? If you don't know the Ethernet IP use a packet sniffer to detect it and then telnet to it. It may not be password protected. -D -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, November 23, 2005 9:59 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Help need to reset Adit 600 for Asterisk install Thanks Jerry, I have called Carrier Access and they can reset the password but for a considerable fee. We have serial access but after it boots it immediately asks for a username and password. We have the username but the password is not what it is suppose to be. There's a reset switch on the faceplate but I think the LOCAL SET is OFF and that is why it doesn't respond. Their manual says the Reset switch is not under the control of LOCAL SET, yet it doesn't seem to work. Well, we might not know the proper boot sequence. It contains flash memory and there is a timing that important to that reset procedure. Anyone's help is much appreciated. --Jim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Jones Sent: Wednesday, November 23, 2005 7:40 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Help need to reset Adit 600 for Asterisk install Not sure but are you connecting via serial or ehternet? Seems to be the serial had a way to do this easily on bootup. Otherwise I would be interested for future reference. Carrier Access does have a good support team, just need to know your serial number. On Nov 23, 2005, at 12:13 AM, <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> wrote: > Looking for a way to hard reset a ADIT 600 just purchased used. > But it > seems to have a master password already set. We've tried the front > reset but maybe we don't have the right sequence of boot order. Any > help would be much appreciated? - Jim > > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users