On Fri, November 25, 2005 9:29, Kristof Hardy said: > Francesco Peeters wrote: >> I compiled 1.2 and bristuff 0.3.0 Pre1 yesterday late and that now seems >> to work! * is up and running *with* 2nd card in NT mode... > > Nice to hear *1.2 and bristuff 0.3pre1 makes a difference.. > >
Just switched the config around so the NT mode card was active, and I got dialtone, etc. :-) Now the hardest part: Connecting the HFC clock lines of both cards to eachother (the soldering iron is ready, just have to shutdown the server and take out the cards) because I need the NT card to be slave to the TE card. (Both cards running their own clocks doesn't seem to agree with asterisk anyway, so it's a good thing I was planning on this all along!) This is the most critical part of the test: Once I start soldering on the cards there is no more returning, no warranty, etc. But I know now that both modes work with 1.2, so it's time to take that plunge! I'll let the list know when I'm done! -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users