Hi Kris, I have TE406P (same as your but quad span) working on 2.6.13 with pre-empt. I had it working fine with 2.6.14 but I could not switch card's IRQ from CPU0 to CPU1 on the 2.6.14 On 2.6.13 CPU1 is handling IRQ's only for TE406P (with occasional timer IRQ's sneaking in).
I suggest that you get the latest source for zaptel from SVN repository. Regards -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kris Amy Sent: Wednesday, 30 November 2005 19:31 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TE210P & Linux SMP Hi, Does anyone have this card(specifically the wct4xxp driver) working under linux and running a SMP kernel? I'm running it in a dual p4 xeon box and when I compile the kernel for SMP and then recompile libpri/zaptel the module doesn't behave correctly(doesn't pick up the pri's). In addition the lights on the back do the following (when no cable is plugged in):- No module - alternate red really fast Module under UP - alternate slow red Module under SMP - Blank I have tried the following kernels:- 2.4.29, 2.4.32, 2.6.14. I would really like to see it working correctly under 2.6 in SMP (with pre-empt etc). Otherwise half of this machine is kinda useless. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
