On Wed, November 30, 2005 12:03, Alejandro Vargas said: > 2005/11/29, Francesco Peeters <[EMAIL PROTECTED]>: >> > try ztcfg -vvv >> > sleep 3 >> > ztcfg -vvv >> Also helpful is >> cat /proc/zaptel/* > > This is what I see: > > [EMAIL PROTECTED] ~]# lsmod |grep zaptel > zaptel 206724 7 > ztdummy,wctdm,wcfxo,wcte11xp,wct1xxp,wct4xxp,tor2 > crc_ccitt 2113 1 zaptel > [EMAIL PROTECTED] etc]# rmmod ztdummy > [EMAIL PROTECTED] etc]# modprobe zaphfc modes=1 > [EMAIL PROTECTED] etc]# ztconfig -vvv > [EMAIL PROTECTED] etc]# ztcfg -vvv >
You are running the HFC-PCI in NT mode. This means you have an ISDN telephone connected to it, rather than using it to connect to the PSTN? > Zaptel Configuration > ====================SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) > > Channel map: > > Channel 01: Clear channel (Default) (Slaves: 01) > Channel 02: Clear channel (Default) (Slaves: 02) > Channel 03: D-channel (Default) (Slaves: 03) > > 3 channels configured. > > Changing signalling on channel 1 from Unused to Clear channel > ZT_CHANCONFIG failed on channel 1: Invalid argument (22) > Did you forget that FXS interfaces are configured with FXO signalling > and that FXO interfaces use FXS signalling? What is in your /etc/asterisk/zapata.conf? I do not recall seeing that info before in this thread... > [EMAIL PROTECTED] ~]# cat /proc/zaptel/* > Span 1: ZTHFC1 "HFC-S PCI A ISDN card 1 [NT]" AMI/CCS > > 1 > 2 > 3 > > ---------------- > My zaptel.conf has this: > > span=1,1,3,ccs,ami > bchan=1-2 > dchan=3 That is fine... However zaptel clearly doesn't have any active channels, so asterisk will break on that. What brand HFC-PCI card do you have, and did you apply the Florz patch? > > Then, I try to start asterisk: > > [EMAIL PROTECTED] ~]# asterisk -c > Asterisk 1.2.0, Copyright (C) 1999 - 2005 Digium. > Written by Mark Spencer <[EMAIL PROTECTED]> > ========================================================================[ > [EMAIL PROTECTED] ~]# Warning, flexibel rate not > heavily tested! > Ouch ... error while writing audio data: : Broken pipe > > > [EMAIL PROTECTED] ~]# tail /var/log/asterisk/ > [...] > 22] chan_zap.c: Unable to specify channel 1: No such device or address > Nov 30 12:00:44 ERROR[3422] chan_zap.c: Unable to open channel 1: No > such device or address > here = 0, tmp->channel = 1, channel = 1 > Nov 30 12:00:44 ERROR[3422] chan_zap.c: Unable to register channel '1-2' > Nov 30 12:00:44 WARNING[3422] loader.c: chan_zap.so: load_module > failed, returning -1 > Nov 30 12:00:44 WARNING[3422] loader.c: Loading module chan_zap.so failed! > That is to be expected as no zap channels are available... -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
