On Wed, November 30, 2005 15:15, Alejandro Vargas said: > OK. Thank you everybody It is working now. The short solution is this: > download bristuff, execute download apply patch, execute compile and > check configs of asterisk in order to run it. > > To add the module to the start, it is easy to add this to > /etc/modprobe.conf > > options zaphfc modes=0 > install zaphfc /sbin/modprobe --ignore-install zaphfc && /sbin/ztcfg > > And this to /etc/sysconfig/zaptel: > > MODULES="$MODULES zaphfc" > > Thank you again. The next step is to try 2 cards... >
When you do, make VERY sure the PCI slots are NOT sharing an IRQ! That'll break it every time! cat /proc/pci | less and then check the IRQs for both cards... -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users