On Fri, December 2, 2005 22:54, Francesco Peeters said: > On Fri, December 2, 2005 22:50, Francesco Peeters said: >> On Fri, December 2, 2005 21:45, Kristof Hardy said: >>> Francesco Peeters wrote: >>>> Does anybody have any experience in this? >>>> I am using * 1.2 BRIstuffed 0.3.0 Pre1 >>> >>> No experience on that, but there's an updated bristuff (0.3.0pre1b), >>> maybe try that one? >>> >>> This is 1 issue that's fixed: >>> - chan_zap/libpri fixes (stuck B channels) >>> >> >> Just installed 0.3.0pre1c, but no change! :-/ >> > > I have now got this little ditty running to keep an eye on it: > while true; do grep "(F" /proc/zaptel/2; sleep .1; done > > I do see the once a minute down-time come by as a combination of 1 F4, 2 > F6's and then F7's. > When it goes down for an extended time, it shows 1 F4 and a lot of F6's > before finally returning F7's again... :-( >
Watching the console for a while I see regular messages, which I could also find in /var/log/messages: Dec 3 16:37:15 asterisk1 kernel: zaphfc[0]: received d channel frame with bad CRC. Dec 3 16:37:36 asterisk1 kernel: zaphfc[0]: empty HDLC frame received. Dec 3 16:37:36 asterisk1 kernel: zaphfc[0]: received d channel frame with bad CRC. Can anyone with one or more HFC-PCI card(s) (esp. in The Netherlands) check if they see these on a regular basis as well? (And I am talking many times an hour here!) TIA! -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 Cologne HFC-S pins #52, #54, #55 connected in parallel for synching. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users