I just wanted to say thanks to everything that provided feedback and assistance on this. I have AAH2.1 running with my Sangoma T1 card. Here's a few of the gotchas I ran into and my process, please note I'm not an asterisk expert and this could be totally wrong but here's what worked for me:
1. you have to compile and install the sangoma files, there's a doc wiki at sangoma.editme.com that should help
2. you have to remove ztdummy from the start up modules. I don't know the most elegant way to do this but I edited /etc/init.d/zaptel and commented out the line that loads it
3. you have to configure the sangoma card using wancfg (very important)
4. edit the etc/zaptel.conf and etc/asterisk/zapata.conf files
That's it so far...
Jess
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
