Hi Jeremy,
The handbook says:
"user: A user can place calls to or through the Asterisk server.
peer: A peer receives calls from the Asterisk server, but does not
place them
friend: A friend both sends and receives calls through the Asterisk
server. This makes the most sense for handsets or other station
devices. When in doubt use this type."
Something must be wrong here since the "peer" setting says that this type of
entity can only receive calls. So if we set both ends to peer then nobody
can make calls. Can you, or somebody else shed some light here please?
Thanks,
Ricardo
----- Original Message -----
From: "Jeremy McNamara" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, October 09, 2003 12:48 PM
Subject: Re: [Asterisk-Users] IAX2 Trunking confirmation?
> From the chan_iax2 source (around line 3712):
>
> if (!peer) {
> ast_log(LOG_WARNING, "Unable to accept trunked packet from '%s:%d':
> No matching peer\n", intoa(sin.sin_addr), ntohs(sin.sin_port));
> return 1;
> }
>
>
> A friend is both a user and peer. However, I would discurage the use of
> a friend as it will severely restrict your dialplan, espcially once you
> are dealing with more than just a couple Asterisk boxes.
>
>
> Jeremy McNamara
>
>
> WipeOut wrote:
>
> > Hi,
> >
> > My question is in refernece to the posting by Jeremy McNamara here..
> >
> >
http://lists.digium.com/pipermail/asterisk-users/2003-October/022966.html
> >
> > He states that in order for "trunking" to work the type has to be
> > peer.. When I set mine up I did so using type=friend just to make it
> > simple.. So when I read the above posting I thought well maybe my
> > "trunking" has not been working properly since I set it up (It does in
> > fact work, I can make and recieve calls over the IAX connection
> > without any apperent problems)..
> >
> > So a short while ago I opened up my conf files and tried setting the
> > type to peer from friend (yes I reloaded *).. Guess what??.. The link
> > no longer worked.. I then tried setting type to user and it is
> > worked.. So my IAX link works as friend and user but not as peer..
> > Seeing as peer was specified as the requirement in order to get an
> > IAX2 trunk to work properly I am a little confused..
> >
> > Is my setup working when it shouldn't be or have I got something
> > backwards??
> >
> > Later..
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > [EMAIL PROTECTED]
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
