Hello,

This looks like the asterisk you are using was compiled for a higher class CPU then the one running it.

Regards
Kiss Karoly

On Mon, 12 Dec 2005, Talat Ishtiaq wrote:

Date: Mon, 12 Dec 2005 15:48:11 +0500
From: Talat Ishtiaq <[EMAIL PROTECTED]>
To: Mark Edwards <[EMAIL PROTECTED]>
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
    <asterisk-users@lists.digium.com>
Subject: Re: [Asterisk-Users] [helpp] Problem in astersik

Hi Mark


The

#/usr/sbin/astersik -vc
-------------------(many verbosity)
Illegal instruction
[EMAIL PROTECTED] postfix]# /usr/sbin/asterisk
[EMAIL PROTECTED] postfix]# /usr/sbin/asterisk -rvvvv
Unable to connect to remote asterisk

still give me illegal instruction in the end.


As long as i remember i did not get any error during make and make
install command.
What packages do you want me to update on my fedora core 3 machine
Plz tell me


Regard
Talat












On Mon, 2005-12-12 at 21:16 +1100, Mark Edwards wrote:
Hi.

First off, the illegal instruction doesn't look at all pretty.

The best way to start a new installation is to start asterisk thus:

/usr/sbin/asterisk -vc

when you get a clean start with no fatal or significant errors, you
can close it out and then start it as a daemon

/usr/sbin/asterisk

Only then can you use "-r" to connect to the remote console.

I would suggest if you are having "illegal instruction' messages, then
asterisk isn't starting cleanly, and you have a significant
compilation issue on your hands.

I would make sure your FC3 box is up2date and that you are not seeing
any significant compilation errors first.

Once you have got things going this far, we can then look at your
dialplan...

cheers,

Mark

On 12/12/05, Talat Ishtiaq <[EMAIL PROTECTED]> wrote:
        Hi I am very new to asterisk

        I am facing some problems
        I have installed asterisk on my fedora core 3 by tar.gz
        by
        #cd /usr/local
        #tar -xzvf asterisk----.tar.gz
        #make
        #make install
        #make samples
        i made following changes in the sip.conf and extention.conf
        In sip.conf
        [500]
        context=fromsip
        type=friend
        username=500
        secret=shanee
        callerid="shanee" <500>
        host=dynamic
        nat=yes
        canreinvite=no
        disallow=all
        allow=ulaw
        dtmfmode=info
        callgroup=3
        pickupgroup=3
        qualify=1000


        [501]
        context=fromsip
        type=friend
        username=501
        secret=shanee
        callerid="shanee" <501>
        host=dynamic
        nat=yes
        canreinvite=no
        disallow=all
        allow=ulaw
        dtmfmode=info
        callgroup=3
        pickupgroup=3
        qualify=1000

        In externsion.conf
        [fromsip]
        exten => s,1,Answer( )
        exten => _5XX,1,Dial(SIP/${EXTEN},100,tr)
        exten => h,1,Hangup
        exten => t,1,Hangup
        exten => i,1,Hangup

        Then What i did is
        [EMAIL PROTECTED] asterisk]# asterisk -rvvv
        Unable to connect to remote asterisk
        [EMAIL PROTECTED] asterisk]# asterisk -c
        Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
        Written by Mark Spencer <[EMAIL PROTECTED]>
        
=========================================================================
        [ Booting...................................................Dec 10
        07:09:47 WARNING[865]: chan_oss.c:257 sound_thread: Read error
        on sound
        device: Resource temporarily unavailable
        ...........Dec 10 07:09:47 WARNING[865]: chan_mgcp.c:4050
        reload_config:
        Unable to get our IP address, MGCP disabled
        ...Dec 10 07:09:47 WARNING[865]: chan_skinny.c:2587
        reload_config:
        Unable to get our IP address, Skinny disabled
        ........................Illegal instruction



        I gave these error to forum and i got reply that you should
        unload the
        mgcp and skinny modules in the modules.conf

        so i unload the following modules by
        noload => chan_mgcp.so
        noload => chan_skinny.so
        noload => chan_oss.so


        [EMAIL PROTECTED] asterisk]# asterisk -c
        Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
        Written by Mark Spencer <[EMAIL PROTECTED]>
        
=========================================================================
        [ 
Booting......................................................................................Illegal
 instruction
        [EMAIL PROTECTED] asterisk]#


        Then i try to start it
        [EMAIL PROTECTED] asterisk]# asterisk -rvvvv
        Unable to connect to remote asterisk
        [EMAIL PROTECTED] asterisk]#



        So can you tell me why i am having this problem and how can i
        solve it



        Regard
        Talat



        _______________________________________________
        --Bandwidth and Colocation provided by Easynews.com --

        Asterisk-Users mailing list
        To UNSUBSCRIBE or update options visit:
           http://lists.digium.com/mailman/listinfo/asterisk-users



--
regards,

Mark P. Edwards
FWD: 667917

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to