So... I would need as you noted two T100P cards or a T400P. The T1 goes into the * Server and the second port of a T400P goes back to the asterisk server. Then the extensions get broken out from the Channel bank?
Geoff -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James Sharp Posted At: Saturday, October 11, 2003 12:02 AM Posted To: Asterisk User Group Conversation: [Asterisk-Users] T100P & Phones Configuration Subject: Re: [Asterisk-Users] T100P & Phones Configuration > Below you will find, what I believe to be a typical setup with a T100P > card. My question is - > > 1. Is this correct? Possibly. Depends on if you use a channel bank that can do add/drop and you're not using a PRI. You'll take your incoming T1 and go into 1 T100P and use another T100P to feed out to your channel bank...or you can get a T400P and just have one card in the system. > > 2. What kind of phones would be needed here... (Would you have to use > Digital phones) And if so what would you recommend. > You can use anything from a $9 WalMart phone to a $300 ADSI analog phone. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users