Having the strangest time getting the uip200 to work with Asterisk.
We can send outgoing calls, however we can not receive phone calls.
I have tried listening to all of the recommendations in this list such
as
setting the nat=never in the sip.conf and that didn't work at all
(phone
stopped registering).
Anyone want to be so kind and let me know what the heck we are doing
wrong?
The asterisk server is located on a static public IP.
The uip200 phones are at a dynamic public IP (different location than
the
asterisk machine) but are behind a router using NAT.
When the phone first authenticates we get:
-- Registered SIP 'uip200-2a' at 141.156.50.142 port 64996 expires
3600
Dec 19 22:26:59 NOTICE[5436]: chan_sip.c:11328 sip_poke_noanswer: Peer
'uip200-2a' is now UNREACHABLE! Last qualify: 0
Then when you try to dial the extension of the phone we get:
Dec 19 22:29:01 NOTICE[16860]: app_dial.c:1010 dial_exec_full: Unable
to
create channel of type 'SIP' (cause 3 - No route to destination)
== Everyone is busy/congested at this time (1:0/0/1)
Thanks for any help!
-Steve
------sip.conf ------------------
[uip200-2a]
type=friend
secret=verysecret
nat=yes ; have also tried nat=never and nat=route
host=dynamic
reinvite=no
canreinvite=no
qualify=1000
dtmfmode=auto ; Choices are inband, rfc2833, or info
dtmf=auto
disallow=all
allow=ulaw
allow=alaw
context=internal
----------------- unidencom.txt ---------------------------------------
# UIP200 Mass Configuration System Generic File
# Notes:
# 1. Lines start with '#' are comments
# 2. To leave a field value unchanged (as saved on local phone), leave
value
to blank.
# 3. To set a field's value to empty, use '-' as value.
# 4. To NOT overwrite user local settings of: programmable key, one/two
touch keys, VMA
# number, VMWILampIndicator, set "OverwriteLocalSetting = NO".
Default is
"YES". This
# key will ALSO affect whether or not THESE settings in
uniden<MAC>.txt
be used.
# 5. Any duplicate parameters exist in both unidencom.txt and
uniden<MAC>.txt, MAC settings
# will be used.
# MAXIMUM FILE SIZE IS 10KB
# Current Limitation: No spaces allowed for a setting's value
# Version: BS4.70
#Overwrite user local settings of programmable keys, one/two touch
keys, vma
settings
#If set to no, these current settings on the phone will not be
overwritten.
OverwriteLocalSettings YES # must be placed on top of config
file
# Sip Settings --If only ProxyServer needed, set OutboundProxy1/ Port
same as
ProxyServer/Port
ProxyServer serveraddress # can be an IP address
or
FDQN
ProxyServerPort 0 # 0 to use default port
OutboundProxy1 serveraddress # can be an IP address
or
FQDN
OutboundProxy1Port 0 # enter a port number or
0
for default (5060)
#OutboundProxy2 192.168.0.2 # can be an IP address
or
FQDN
#OutboundProxy2Port 0 # enter a port number or 0 for
default
(5060)
#EmergencyProxy 192.168.1.102
#EmergencyProxyPort 0
Registrar1 serveraddress # can be an IP
address
or FQDN
Registrar1Port 0 # enter a port number or
0
for default (5060)
#Registrar2 10.15.15.127 # can be an IP address
or
FQDN
#Registrar2Port 0 # enter a port number
or 0
for default (5060)
RegisterExpireSec 3600
Q_Param 50
RegisterExpireLimitPercent 10
Register403RetrySec 1200
SipPort 5060
SRVRecordName - #_sip._udp.uniden.com
FailoverRetrySec 4 # For Redundant Outbound proxy server
#InterDigitTimer Value in milli seconds (minimum is 1000ms = 1Second)
InterDigitTimer 4000
# options are ON or OFF
SessionTimerSupport ON
# options are ON or OFF
SessionTimerRefresher ON
SessionTimerMin 60
TimerInterval0 300
TimerInterval1 150
# Audio Settings
G711MuTxPacketLength 20
G711MuJitterBufferLength 10
G711MuJitterBufferMax 200
G711ATxPacketLength 20
G711AJitterBufferLength 10
G711AJitterBufferMax 200
G729TxPacketLength 20
G729JitterBufferLength 10
G729JitterBufferMax 200
LongHoldAlertPeriod 360
RTPPortBase 25000
# options are ENABLE and DISABLE
DiffServMode ENABLE
DefaultDiffServParam 40
RTPDiffServParam 41
# options are TRUNKMODE, CASCADEMODE, DISABLE
VlanMode DISABLE
VlanID 1
PcVlanID 2
#SNTP Settings
# choices are YES and NO
EnableSNTP yes
# SNTP Server IP address
SntpServerIP 192.5.41.40
TimeZone -6 # -6 For Central Time Zone
# choices are YES and NO
EnableDST YES
# Time period (in seconds) before recontacting SNTP server
SntpRetrySec 1800
# preferred codec are listed from most preferred, separated by commas
and NO
space
PreferredCodec g711u,g711a,g729
# choices are English, Spanish, and French
Language English
#choices are Enable and Disable
CallWaiting Enable #
EmergencyProxyPrefix **
# STUN: If Server IP sis 0.0.0.0 STUN is disabled
StunServerAddr 0.0.0.0 # stun.softjoys.com # stun.fwdnet.net
# I
have tried both of theve stun servers
StunServerPort 0 # 3478 # i have tried the port 3478 also
#Periodic update in seconds of MEDIA NAT ports (minimum is 10 and set 0
to
disable)
StunServerUpdateSec 0 # 30
#Periodic update in seconds to keep SIP NAT port open (minimum is 10
and set
0 to disable)
StunServerNATKeepAliveSec 0 # 30
# ALLOW IP DIALING with # as the first digit map
DirectIpDialing Enable #Enable/Disable
# Set YES to AllowSharpAsDial to have # as your DIAL key.
AllowSharpAsDial Yes #Yes/No
#Flash Based Service Parameters:
# DTMFFlashEvent (Enable/Disable) -- Send RFC2833 Event 16 when enabled
and
XFER button is pressed.
DTMFFlashEvent Disable
#HotLineDisplay (Enable/Disable) -- Do not display HOTLINE on LCD when
Hotline Number is set
HotLineDisplay Disable
#User Agent Name Settings. Use Character "^" for space
UseCustomizedUserAgentName No
CustomizedUserAgentName Uniden^Customized^UA
#Admin password must be numeric. Max is 6 digits. Format:
oldpassword/newpassword
#AdminPassword 1234/1111
#end_of_file
--------- uniden<mac>.txt ---------------
# UIP200 Mass Configuration System Mac-based File
# Notes: Lines start with '#' are comments
# To leave a field value unchanged (as saved on local phone), leave
value to
blank.
# To disable a field, use '-' as value
# MAXIMUM FILE SIZE IS 10KB
# Current Limitation: No spaces allowed for a setting's value
# Version: BS4.70
# Firmware. The items listed in this Firmware section must be in this
order.
# FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate
is
YES
# FimrwareFileName only used if FirmwareVersion differ from firmware
ver in
Flash
AutoFirmwareUpdate YES #choices are YES and NO
FirmwareFileName uip200_470enc.pac
FirmwareVersion BS4.70
# Sip Settings
MyLcdDisplay uip2a
MyDialNumber uip200-2a
DisplayName uip2a
UserNameForProxy uip200-2a
PasswordForProxy verysecret
UserNameForRegistrar uip200-2a
PasswordForRegistrar verysecret
# Programmable Keys. Key functionality must go before key values.
ProgrammableKey1 OneTouchDial
ProgrammableKey2 OneTouchDial
ProgrammableKey3 OneTouchDial
ProgrammableKey4 CallForward
ProgrammableKey5 TwoTouchDial
ProgrammableKey6 DoNotDisturb
ProgrammableKey7 VMA
ProgrammableKey8 Mute
# One and Two-touch keys. Must go after Programmable keys functionality
definitions.
# Refer to Programmable and Fixed Function Keys for usage guide
# OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial
OneTouchKey1 95558111111
OneTouchKey2 5553456
OneTouchKey3 3456
OneTouchKey4 3457
OneTouchKey5 18175553152
OneTouchKey6 18175553152
OneTouchKey7 18175553152
OneTouchKey8 18175553152
TwoTouchDigit0 3459
TwoTouchDigit1 3450
TwoTouchDigit2 4420
TwoTouchDigit3 4421
TwoTouchDigit4 4422
TwoTouchDigit5 4423
TwoTouchDigit6 4424
TwoTouchDigit7 4425
TwoTouchDigit8 4426
TwoTouchDigit9 4427
# Hotline and vmwi numbers --Must be placed after OneTouchDial's
HotLineNumber -
VmaDirectCallNo 3685 #value associating with VMA
Programmable
key.
VmwiLampIndicator Enable
TimeDisplay Enable
ImportPhoneBook No
#end of file
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
