Hey Rich, As it turns out, this wasn't a firewall configuration problem at all. I had the firewall cofiguration nailed from the outset. This was just me not being used to how AMP works ( new to AMP ). Thanks though, I apprecaite the offer for help! Sean Rich Adamson wrote: I've got an * sitting behind a linux iptables firewall. I have an account with teliax. After entering the registration information accurately and restarting *, iax2 show registry shows a registered status on that connection.However, whenever I try to place a call, I get a "No one is available to answer at this time (1:0/0/0)" status returned from the dial attempt. When the same account is used on the firewall ( which I installed * to test this ), it works just fine. `tcpdump -i eth1 host voip-co2.teliax.com` on the trouble box shows packets coming and going to teliax without a problem. So I'm sort of at a dead end on how to figure this out. Everything looks like it's registered, and packets are flowing to the box and the box is able to get out ok. But for whatever reason, my calls aren't being completed. Can anybody give me another idea of where to look for the problem?Do an 'iax2 debug' while placing a call and analyze the output. Paste it into a posting here if needed. |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users