Can someone describe a simple means of doing this upgrade? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Malcolm Davenport Sent: Friday, December 23, 2005 11:24 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TDM2400P driver change
Hello, Thank you for your support of Digium and Asterisk. Yesterday, we identified a problem with the driver for the TDM2400P card when used with FXO port modules. The X400M was producing (and expecting) the audio signal at an abnormally high level, which negatively impacted the performance of the echo cancelers, both hardware and software. It also resulted in unusual audio artifacts when the actual signal was already at a high level. The driver in our Subversion repositories of Zaptel (both 'trunk' and 'branches/1.2') has been modified to properly initialize the FXO ports to alleviate this problem. We encourage all owners of TDM2400P cards with FXO ports to update their driver as soon as possible, especially if they are experiencing audio quality and/or echo issues on the FXO ports. This updated driver will be part of the Zaptel 1.2.2 release as well, if you wish to wait for a tarball release. Thank you again for supporting Digium and Asterisk! -- Malcolm Davenport Digium _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users