Possible polarity problem with the
jack.
-Kerry
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Filippo Carone
Sent: Friday, December 23, 2005 2:16 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] tdm400 fxo problem
I'm experiencing a very weird behaviour with my tdm400 with two fxo and one fxs modules. I setup my current configuration at home, I tried it and it works flawlessly. I moved the computer to my office and plugged the fxo to the wall plug, but when I tried to call I got a busy signal. I attached the same wire to a phone, I called again and the phone rang. I tried with both the fxo ports, but I always got a busy signal and on the CLI Asterisk doesn't notice the incoming call at all. Outgoing calls do not work either.
So I moved again the computer to the home of a friend, and it there it works too as it does at my place. When I plugged the TDM at the office no other phone was plugged in the whole structure.
I'm really puzzled and I don't know why it is behaving this way. Any hints?
Cheers,
fc
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
