Mr Asterisk wrote:
P4, 400 Mhz, 384Mb RAM, 40Gb HD
4 OEM X100P Cards
With 4 X100P cards, you are putting an enormous strain on a PC of that
class. Consider moving to a TDM400 card.
Questions
1)
When someone calls in to one of the FXO lines, there is a 3-4 second delay
before the configured internal extension starts ringing. Is there anyway to
reduce this?
Not really, Asterisk has to answer and then forward. That take a little
time.
2)
Is it possible to make Asterisk behave like a typical office PBX, in so much
as after I press 9, I then get an outside line and hear the TelCo. dial
Yes, but then you'd loose the ability to control the call. You can do a:
*exten => _9.,1,Dial(ZAP/1/9)*
But, at this point you won't be able to restrict anything. Very bad idea.
3)
I get a lot of echo and noise distortion when making an external TelCo call.
Some people say they can't hear what I say.
Again, move away from the X100P cards
4)
Is it possible to make a routing, as follows
Dial 8 go to Internet Call
Dial 9 go to TelCo. Call
Yes
Doug
--
Ben Franklin quote:
"Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve neither Liberty nor Safety."
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users