Off hand, I agree that it's probably doable...even if you have to put another sip server inbetween. (or pay the $10 per channel for the g729 licence if it's only a few channels)
PaulH ----- Original Message ----- From: "Simone Cittadini" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Thursday, December 29, 2005 7:52 PM Subject: Re: [Asterisk-Users] select codec based on extension > Leandro Rzezak ha scritto: > > > I'm having same problem. Were you able to solve it? > > No, codecs became a secondary problem later in our project so we ended > up with 711 on all servers and more bandwidth, anyway the post refers > to asterisk 1.0.something and I never investigated the problem in more > detail... I think it's possible, usually when you receive no answers (as > the case of that post) you have made a really silly question :) > > > > > On 10/18/05, *Simone Cittadini* <[EMAIL PROTECTED] > > <mailto:[EMAIL PROTECTED]>> wrote: > > > > I've the following installation : > > > > |asterisk client| --- > |asterisk server| --- > |other asterisk > > server| > > > > all the connections are made in IAX, the client and first server > > allows > > 711 and 729 > > the other server only allows 729 since it has low bandwidth at > > disposal > > > > all the numbers but a few are routed to a digium card in the first > > server, the others are routed to the other server, this way : > > > > [default] > > > > exten => _123X.,1,Dial(IAX2/otherserver/${EXTEN}) > > exten => _123X.,2,Hangup > > > > exten => _X.,1,Dial(Zap/g1/${EXTEN}) > > exten => _X.,2,Hangup > > > > when I call 123456 from the client box ... > > > > on the client : > > Call accepted by asterisk server (format alaw) > > > > on the server : > > Call accepted by other asterisk server (format g729) > > > > on the other server : > > Called [EMAIL PROTECTED] > > > > and then on the server in the middle : > > Oct 18 18:00:37 NOTICE[2846]: channel.c:1724 ast_set_write_format: > > Unable to find a path from alaw to g729 > > Oct 18 18:00:37 NOTICE[2846]: channel.c:1757 ast_set_read_format: > > Unable > > to find a path from g729 to alaw > > > > since that "something" at the end of the call and the paps which sits > > before the first asterisk server both have g729, I don't like too > > much > > having to pay to translate something which need not translation. > > Is there a clever combination of sip.conf, iax.conf and > > extensions.conf > > I'm missing to solve my problem ? > > _______________________________________________ > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
