It was jumpers, thanks for the reply. Sorry for the spam everyone.
It would be helpful to get a little quick start card with these cards to save me a day of head aches but not to worry. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Liew Sent: 28 December 2005 22:45 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Driver not configuring correctly on TE210P forCCS Hi Alex, Have you checked that your jumper setting on the card has been shorted for E1. Its open by default to T1 - which overrides your zaptel.conf settings. Cheers, Paul Information contained in this e-mail and any attachments are intended for the use of the addressee only, and may contain confidential information of Ubiquity Software Corporation. All unauthorized use, disclosure or distribution is strictly prohibited. If you are not the addressee, please notify the sender immediately and destroy all copies of this email. Unless otherwise expressly agreed in writing signed by an officer of Ubiquity Software Corporation, nothing in this communication shall be deemed to be legally binding. Thank you. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
