What is your firmware version? I have a few problems with the release 7.5
Miguel Ben Fitzgerald wrote:
Hi, Apologies for hitting the list with such a long mail on my first post! Having seen the archives this seems like a list that likes debugging output. If I have left any information out please let me know. I have recently begun using asterisk on debian. [EMAIL PROTECTED] /usr/sbin/asterisk -V Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k [EMAIL PROTECTED] dpkg -l asterisk Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-===================-===================-========================== ii asterisk 1.0.7.dfsg.1-2 Private Branch Exchange (PBX) I have an odd problem that may be known as I saw one similar posting. I have the following config on my cisco 7940: line1_name : "localuser" line1_authname : "localuser" line1_password : "localpass" line1_shortname : "asterisk" line1_displayname : "myphone" Then in sip.conf: [localuser] type=friend username=localuser secret=localpass auth=md5 host=dynamic dtmfmode=rfc2833 nat=no allow=all canreinvite=no Phone IP: 192.168.1.50. I startup asterisk and connect to the console, and set: sip debug ip 192.168.1.50 set verbose 255 set debug 255 The console output is as follows: ########## Start asterisk debug output ############### Sip read: REGISTER sip:192.168.1.4 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.50:5060;branch=z9hG4bK4b1f5669 From: sip:[EMAIL PROTECTED] To: sip:[EMAIL PROTECTED] Call-ID: [EMAIL PROTECTED] Date: Mon, 02 Jan 2006 21:11:05 GMT CSeq: 646 REGISTER User-Agent: CSCO/7 Contact: <sip:[EMAIL PROTECTED]:5060> Content-Length: 0 Expires: 3600 11 headers, 0 lines Jan 2 21:11:05 DEBUG[6128]: chan_sip.c:2355 sip_alloc: Allocating new SIP call for [EMAIL PROTECTED] Using latest request as basis request Sending to 192.168.1.50 : 5060 (non-NAT) Transmitting (no NAT): SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.1.50:5060;branch=z9hG4bK4b1f5669 From: sip:[EMAIL PROTECTED] To: sip:[EMAIL PROTECTED];tag=as01aba5cf Call-ID: [EMAIL PROTECTED] CSeq: 646 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER Contact: <sip:[EMAIL PROTECTED]> Content-Length: 0 to 192.168.1.50:5060 Transmitting (no NAT): SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.1.50:5060;branch=z9hG4bK4b1f5669 From: sip:[EMAIL PROTECTED] To: sip:[EMAIL PROTECTED];tag=as01aba5cf Call-ID: [EMAIL PROTECTED] CSeq: 646 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER Contact: <sip:[EMAIL PROTECTED]> WWW-Authenticate: Digest realm="mail.bfitzgerald.co.uk", nonce="773ad211" Content-Length: 0 to 192.168.1.50:5060 Scheduling destruction of call '[EMAIL PROTECTED]' in 15000 ms Urgent handler Sip read: REGISTER sip:192.168.1.4 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.50:5060;branch=z9hG4bK1f807b05 From: sip:[EMAIL PROTECTED] To: sip:[EMAIL PROTECTED] Call-ID: [EMAIL PROTECTED] Date: Mon, 02 Jan 2006 21:11:06 GMT CSeq: 647 REGISTER User-Agent: CSCO/7 Contact: <sip:[EMAIL PROTECTED]:5060> Authorization: Digest username="localuser",realm="mail.bfitzgerald.co.uk",uri="sip:192.168.1.4",response="56cf80cc6dc37af4e3f6e036cb45a7bd",nonce="773ad211",algorithm=md5 Content-Length: 0 Expires: 3600 12 headers, 0 lines Using latest request as basis request Sending to 192.168.1.50 : 5060 (non-NAT) Transmitting (no NAT): SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.1.50:5060;branch=z9hG4bK1f807b05 From: sip:[EMAIL PROTECTED] To: sip:[EMAIL PROTECTED];tag=as01aba5cf Call-ID: [EMAIL PROTECTED] CSeq: 647 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER Contact: <sip:[EMAIL PROTECTED]> Content-Length: 0 to 192.168.1.50:5060 Urgent handler * ########## End asterisk debug output ############### The tethereal capture on my asterisk server is as below: 39.943108 192.168.1.4 -> 192.168.1.50 SIP Status: 100 Trying (1 bindings) 39.943335 192.168.1.4 -> 192.168.1.50 SIP Status: 401 Unauthorized (1 bindings) 40.184716 192.168.1.50 -> 192.168.1.4 SIP Request: REGISTER sip:192.168.1.4 40.185768 192.168.1.4 -> 192.168.1.50 SIP Status: 100 Trying (1 bindings) 59.999521 192.168.1.1 -> Broadcast ARP Who has 192.168.1.50? Tell 192.168.1.1 The main problem is I cannot get my 7940 to register. But in attempting to debug this I have seen another problem. Asterisk stops outputting to the console after the above output. Even when subsequent REGISTER requests are seen by tethereal I do not get any more asterisk console messages. This makes me wonder if the debian distro package is correct. Surely this is a problem with the package? The phone starts to register but doesn't quite manage it: SIP Phone> sh reg LINE REGISTRATION TABLE Proxy Registration: ENABLED, state: IDLE line APR state timer expires proxy:port ---- --- ------------- ---------- ---------- ----------------- 1 11x REGISTERING 3600 204 192.168.1.4:5060 Then falls back to trying to register: SIP Phone> sh reg LINE REGISTRATION TABLE Proxy Registration: ENABLED, state: IDLE line APR state timer expires proxy:port ---- --- ------------- ---------- ---------- ----------------- 1 .1x IDLE 60 50 192.168.1.4:5060 Any help you can offer is greatly appreciated. Many thanks, Ben.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users