I had a problem which I spoke to Grandstream about. It seemed that around 7 seconds in it goes for time sync and if it fails it doesn't retry. This problem was highlighted by the .12 firmware and a Windows DHCP server we were using. Upon moving to a Linux DHCP server the process was much quicker and NTP worked. However there isn't an auto DST mode.... This upset a lot of people here where I work as all the clocks were wrong. Shame is these are reasonably cheap and fairly descent phones but we are now moving towards the Aastra range.
I've tried out .13 and NTP worked fine. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Bowyer Sent: 31 December 2005 10:35 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] GXP-2000 fw 1.0.1.13 and NTP Hi all Slightly OT but I know a lot of GS experts hang out here - I just upgraded a GXP-2000 to firmware 1.0.1.13 to try out the BLF functionality with Asterisk (which so far works as expected), but as a side-effect the phone won't sync with an NTP server - I've tried different server names (time.nist.gov and pool.ntp.org) and IPs in the config, but it refuses to update the time on the display. Anyone heard of this? Any workarounds (other than go back to 1.0.1.12) ? (Hmmm.. just regressed to 1.0.1.12 and it's still not working - curiouser and curiouser said Alice...) Thanks Peter _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users