On Wed, January 4, 2006 15:45, Tomislav Parcina said:
> In article <[EMAIL PROTECTED]>,
> [EMAIL PROTECTED] says...
>> In Asterisk v1.2.1 check the "featuremap" section of the "features.conf"
>> file. You also need to add the "w" or "W" option to your "Dial" cmd
>> where
>> appropriate. So with the feature mapping below pressing *1 would start
>> recording.
>>
>> [featuremap]
>> blindxfer => #1 ; Blind transfer, default is #
>> disconnect => *0 ; Disconnect
>> automon => *1 ; One Touch Record
>> atxfer => *2 ; Attended transfer
>
> I need to dail *1 to quickly. Can that be changed?
>
Try experimenting with this:
[general]
featuredigittimeout = 1000 ; Max time (ms) between digits for
; feature activation. Default is 500
HTH!
--
F Peeters
PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
AMD Duron 1GHz - 1GB - * 1.2.1
2 Sweex HFC-PCI cards
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
