I have ISDN BRI line (Point-to-multipoint), with HFC card and bristuff/zaphfc driver.
I also have TA attached to NT, with analog phones and modem on it. When I'm dialling through Asterisk/bristuff, and in the same time TA have some conversation (or maybe modem link) on channel 1, I can hear that conversation (or modem) very short period (0.2sec), and I also disturbing that conversation (modem). On CLI is shown: -- Called g1/454325454 -- Moving call from channel 1 to channel 2 But this short "moving" call from busy channel 1 to free channel 2 is enough to break my modem link which operating on channel 1. Interesting, if I call exactly through channel 1 "dial(ZAP/1/...)" I'm also getting "Moving call from channel 1 to channel 2". It's no help to use "chanisavail(ZAP/1)" because same thing happening: channel is marked as available, but then disturbing existing conversation on channel 1 and then moving from 1 to 2. If channel 1 is occupied with Asterisk (bristuff) conversation, then this problem don't exist (no disturbing). _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users