I have fixed this before, but I cannot for the life of me remember how I did it.
I have a TDM400P with one fxo module and one fxs module. I setup Asterisk @Home and everything works fine, except when I try and call out. If I call out with a SIP phone it calls the zap extension and not the pstn line? If I take the zap extension offhook and call with the SIP phone it dials out the pstn line fine. I am not sure why the zap extension is being included in the group, but I cannot find where to change it in AMP or the .conf files. Any help would be appreciated. ; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" signalling=fxo_ks ; Note: this is an extension. Create a ZAP extension in AMP for Channel 1 context=from-internal group=1 channel => 1 ; channel 2, WCTDM, inactive. ; channel 3, WCTDM, inactive. signalling=fxs_ks ; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 4 context=from-pstn group=0 channel => 4 Dan _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
