Darrick Hartman wrote:
A little background. I'm integrating asterisk as the voicemail service for an old Meridian/Norstar pbx which has an ATA-2 connected. The ATA-2 is used to connect an analog device (such as a voice modem) to the pbx. In the past we've used vgetty and a voice modem with varying degrees of success.
If you haven't yet, I'd turn on busydetect in zapata.conf. Can't hurt and might (although unlikely) work (I had to turn it on to make it work on my system). Switching to loop-start might be worth a try, too.
For a while my VM * system wasn't doing disconnect detection, and it was OK. I had trouble with the single-port cheapo cards off eBay with the silence thresholds, but using a TDM400P card fixed that for me. Also make sure all you menus will time out and hang up.
You could try posting to the Nortel list: http://www.tgrace.com/mailman/listinfo/nortel-list They've been very helpful and kind to me. Phil _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
