On Friday January 13 2006 10:14 pm, James Harper wrote: > The best I can do so far (which appears to be a bit of a hack) is > (<:0>S0), which says to add a '0' to the start of the string and dial > immediately. This gives asterisk an extension dialled of '0', which > isn't the 's' that i'd hoped for, but is a good start! > > (S0) by itself doesn't work, nor does (<:>S0). > > Any other suggestions? > > Thanks > > James > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:asterisk-users- > > [EMAIL PROTECTED] On Behalf Of James Harper > > Sent: Saturday, 14 January 2006 13:31 > > To: Asterisk Users Mailing List - Non-Commercial Discussion > > Subject: [Asterisk-Users] linksys pap2 automatically connect on > > liftinghandset > > > > Is there a way to configure the linksys pap2 to automatically connect > > to > > > asterisk on lifting the handset (presumably into the 's' state)? > > Asterisk would then be listening for DTMF tones to figure out what to > > do > > > rather than having to put a dial plan into each pap2. > > > > I think the pap2 is pretty much the same inside as a few of the sipura > > boxes so the same thing might work if anyone knows... > > > > Thanks > > > > James Create an extension that will catch what ever number you put into the PAP2 as (SO<:Extension_in_Asterisk) This provides a hot line setup per the documentation for a SPA-3000 which I believe has the same dial plan execution as the PAP2, at least all the stuff i did on one worked on the other. John M _______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
