Just in case, this is my /proc/interrupts
[EMAIL PROTECTED] proc]# cat interrupts
CPU0
0: 56794 IO-APIC-edge timer
8: 1 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
14: 4141 IO-APIC-edge ide0
169: 2889 IO-APIC-level libata, uhci_hcd:usb4, eth0
177: 0 IO-APIC-level ehci_hcd:usb1
185: 0 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb5
193: 0 IO-APIC-level uhci_hcd:usb3
201: 86798 IO-APIC-level t1xxp
NMI: 0
LOC: 56751
ERR: 0
MIS: 0
Still, modifying the numbers on the chkconfig --level for zaptel & asterisk
I get the same problem. I enabled zaptel on 1, 2, 3, 4, 5, and asterisk at
3,4 & 5.
Still doesn't load wct1xxp. The /proc/zaptel/1 doesn't exists. However, If I
stop both. Then start service by hand, everything goes fine.
Thanks again,
Carlos
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
