Hi armin, thx for the answer. I have connected the BRI on a HiPazt4000 and i still have the same issue. So i think i have a problem with my ISDN line. I will contact my provider. May be a reset of the line will solve the problem.
rich. --- Armin Schindler <[EMAIL PROTECTED]> wrote: > On Tue, 17 Jan 2006, richard Coco wrote: > > Hi Armin, > > > > thx for your feedback, but what do you mean with > "Did > > you load the card with config for DID on that > port?" > > > > I have loaded the modules with: > > modprobe capi > > modprobe kernelcapi > > modprobe divacapi > > modprobe divas > > > > and then loaded divactrl like this: > > divactrl load -f ETSI > > > > I suppose that this is ok (it works without did)? > Or > > have i forgotten something? > > With > divactrl load -f ETSI > you load the card to PtMP (which is the default) on > all four ports. > Use > divactrl load -c 1 -SeparateConfig -u1 > where the '1' of -u1 means second port. > E.g. -u is first port, -u1 -u2 -u3 is port 2,3,4. > > When using -SeparateConfig, the X-extension is > available > for many options. > > E.g., you can put port 3 and 4 into NT-mode, or even > run another protocol > (1TR6, JAPAN, QSIG,...) on other ports. > > See > divactrl load -h > for all options. > > Armin > > > thx in advance.. > > > > --- Armin Schindler <[EMAIL PROTECTED]> wrote: > > > > > On Mon, 16 Jan 2006, richard Coco wrote: > > > > Hi all, > > > > > > > > i have asterisk 1.0.9 with an Eicon Diva 4bri > and > > > > chan_capi-cm-0.6. I have 2 NTBAs (one with did > and > > > one > > > > without). > > > > When using the one without did, i am able to > place > > > > outgoing and incoming calls. When i use the > NTBAs > > > with > > > > did i have a layer 2 error. > > > > > > > > Anyone an idea? > > > > > > Did you load the card with config for DID on > that > > > port? > > > What are your divactrl parameters? (Or do you > use > > > Eicon Package with xml based config?) > > > > > > Armin > > > > > > > -- Executing Dial("SIP/2004-9634", > > > > "CAPI/g1/43XXXXXX") in new stack > > > > > data = g1/43XXXXXX > > > > > parsed dialstring: 'g1' '43XXXXXX' '' > > > > > capi request group = 2 > > > > > parsed dialstring: 'g1' '43XXXXXX' '' > > > > == EICON: Call CAPI/EICON/43XXXXXX-6 > > > (pres=0x00, > > > > ton=0x00) > > > > CONNECT_REQ ID=001 #0x000c LEN=0065 > > > > Controller/PLCI/NCCI = 0x1 > > > > CIPValue = 0x10 > > > > CalledPartyNumber = > <80>43XXXXXX > > > > CallingPartyNumber = <00 80 > > > > 22>EyeBeam<22> <3c>2004<3e> > > > > CalledPartySubaddress = default > > > > CallingPartySubaddress = default > > > > BProtocol > > > > B1protocol = 0x1 > > > > B2protocol = 0x1 > > > > B3protocol = 0x0 > > > > B1configuration = default > > > > B2configuration = default > > > > B3configuration = default > > > > BC = default > > > > LLC = default > > > > HLC = default > > > > AdditionalInfo > > > > BChannelinformation = <00 00> > > > > Keypadfacility = default > > > > Useruserdata = default > > > > Facilitydataarray = default > > > > > > > > -- Called g1/43XXXXXX > > > > CONNECT_CONF ID=001 #0x000c LEN=0014 > > > > Controller/PLCI/NCCI = 0x201 > > > > Info = 0x0 > > > > > > > > -- EICON: received CONNECT_CONF PLCI = > 0x201 > > > > DISCONNECT_IND ID=001 #0x0011 LEN=0014 > > > > Controller/PLCI/NCCI = 0x201 > > > > Reason = 0x3302 > > > > > > > > DISCONNECT_RESP ID=001 #0x0011 LEN=0012 > > > > Controller/PLCI/NCCI = 0x201 > > > > > > > > > CAPI INFO 0x3302: Protocol error > layer 2 > > > > == EICON: CAPI Hangingup > > > > == EICON: Interface cleanup PLCI=0x201 > > > > == No one is available to answer at this > time > > > > > > > > my capi.conf looks like: > > > > [DID] > > > > controller=1,2,3,4 > > > > isdnmode=did > > > > incomingmsn=* > > > > softdtmf=on > > > > relaxdtmf=on > > > > accountcode= > > > > context=DID > > > > echocancel=yes > > > > ;echocancelold=yes > > > > devices=2 > > > > group=1 > > > > > > > > > > > > > > > > > __________________________________________________ > > > > Do You Yahoo!? > > > > Tired of spam? Yahoo! Mail has the best spam > > > protection around > > > > http://mail.yahoo.com > > > > > _______________________________________________ > > > > --Bandwidth and Colocation provided by > > > Easynews.com -- > > > > > > > > Asterisk-Users mailing list > > > > To UNSUBSCRIBE or update options visit: > > > > > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > > --Bandwidth and Colocation provided by > Easynews.com > > > -- > > > > > > Asterisk-Users mailing list > > > To UNSUBSCRIBE or update options visit: > > > > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > __________________________________________________ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam > protection around > > http://mail.yahoo.com > > _______________________________________________ > > --Bandwidth and Colocation provided by > Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users