I downloaded and
installed the none commercial g729 codec very often now
I only disable HT on my
systems I think * doesn’t like this
One of the guys @ digium advised
me to turn it of, since they haven’t written * to be multi treading any
way
The codec I download is
the http://kvin.lv/pub/Linux/Asterisk/codec_g729-gcc-pentium4.so
It should work fine.
Wouldn’t know what
it does when you parallel install it with the commercial ones.
For my customers using *,
I purchase * commercial edition with a g729 for each phone attached to the
system.
But test servers run
normal * 1.2.1 with this codec, and, no problems even when beating up the
system with a lot of calls.
Use centos 4.1 very basic
installation for operating system.
* at home might be different though, but “normal” *
works fine for me, also @ home.
joash
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Sunday, January 22, 2006
1:50 PM
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Subject: Re: [Asterisk-Users]
Installing the none commercial intel g729codecsinto [EMAIL PROTECTED] 2.2?
Recently i bought 2 channels from diguim and installed it. It works
well.
Just wanna know if i can install the non-commercial version to get more
channels. Will it create problems for my purchased one's?
Anyone did that? Pls comment.
Also if anyone know which .so to chose. Im using a P4 2.66 with HT.
On 22/01/06, Charles
Wang <[EMAIL PROTECTED]>
wrote:
I have the same problem too.
I install the G.729 (IPP) to asterisk 1.0.x, and it works well.
When I change asterisk from 1.0.x to 1.2.x, and G.729 seems work fine.
I can use "show translation" and find it too. But when I make a call
using G.729.
The asterisk (1.2.1) crashed. If i mark the line "allow=g729" from
sip.conf.
And asterisk works fine.
2006/1/22, Guillermo Salas M <[EMAIL PROTECTED]>:
> Con fecha 21/1/2006, "Francesco Peeters (Asterisk)"
> <[EMAIL PROTECTED]>
escribió:
>
> >On Sat, January 21, 2006 23:21, Franz Bräuer said:
> >> Hi,
> >>
> >> MapsAir wrote:
> >>> Has anyone successfully Installing the none commercial intel
g729 codecs
> >>> into [EMAIL PROTECTED] 2.2?
>
> I'm using g723.1 and works very well.
>
> >>
> >> Installed them today. Installing from source didn't work for me
(Debian,
> >> Asterisk 1.2 from svn) but just adding the binaries (see the wiki
on
> >> voip.org ) did the job. Have you
already tried the binaries?
> >>
> >
> >Kewl! Those work like a treat!
> >
> >As my testbox is a PII-750 running [EMAIL PROTECTED] 2.2 I did:
> >
> >cd /usr/lib/asterisk/modules/
> >wget http://kvin.lv/pub/Linux/Asterisk/codec_g723-gcc-pentium2.so
> >wget http://kvin.lv/pub/Linux/Asterisk/codec_g729-gcc-pentium2.so
> >
> >After reloading, 'show translation' gives:
> > Translation times
between formats (in milliseconds)
> > Source
Format (Rows) Destination Format(Columns)
> >
> > g723
gsm ulaw alaw g726 adpcm slin
lpc10 g729 speex ilbc
> > g723
- 22 8
8 17 8
7 24 115
198 97
> > gsm 151
- 7
7 16 7
6 23 114
197 96
> > ulaw
146 16 -
1 11 2
1 18 109 192 91
> > alaw
146 16 1
- 11 2
1 18 109
192 91
> > g726
154 24 10 10
- 10
9 26 117 200 99
> > adpcm
146 16 2
2 11 -
1 18 109 192 91
> > slin
145 15 1
1 10 1
- 17 108 191 90
> > lpc10
161 31 17 17 26 17 16
- 124 207 106
> > g729
169 39 25 25 34 25 24 41
- 215 114
> > speex
160 30 16 16 25 16 15 32
123 - 105
> > ilbc
173 43 29 29 38 29 28 45
136 219 -
> >
> >Jolly good show, old chap!
> >
> >--
> >F Peeters
> > PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz
patch
> > 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
> > Cologne HFC-S pins #52, #54, #55 connected in
parallel for synching.
> > AMD Duron 1GHz - 1GB - * 1.2.1
> > 2 Sweex HFC-PCI cards
> >_______________________________________________
> >--Bandwidth and Colocation provided by Easynews.com
--
> >
> >Asterisk-Users mailing list
> >To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-user
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
--
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
Best Regards
Charles
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com
--
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users