Same thing...even with the commercial Digium G729 codec. I have to specifiy G729br8 on the Cisco.
Cisco issue? Bill -----Original Message----- From: Bill Gibbs Sent: Monday, January 23, 2006 12:01 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] G729 and Cisco IOS 12.4 I have the same issue. I just bought the commercial version from Digium to see if that has the same problem. I wanted to use the free one to test out g729. My Polycom 301 had no issues using the free codec though (testing via VM, etc) Bill -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Todd Weiser Sent: Tuesday, December 20, 2005 12:59 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] G729 and Cisco IOS 12.4 Can anyone confirm that when using the G729 codec from http://kvin.lv/ pub/Linux/Asterisk/ and a Cisco gateway running IOS 12.4, codec negotiation fails? When I configure the dial-peer in the router with g729r8, it fails. If I use g729br8 (which uses a built-in VAD), it works. This behavior started since we upgraded the router from 12.3 (which had no issues). _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
