> > JanM wrote: > > > > > Hello, > > > > > > Does anyone know how to set the outgoing CallerID properly > > when using Snom200/SIP/CAPI/BRI? > > > > --SNIP-- > > > My mobile is only showing some other number that my isdn > > line is having. > > > > > > ---JanM--- > > Telecom restrictions? > > I can set only caller IDs within the set of numbers provided > > me from telecom. > > Check with your telecom if you're allowed to set any caller ID. > > I'm experiencing the exact same behavior. > > I have an E1 line (using TE410P) with 30 numbers associated > to it, and I know that I'm allowed to change the outgoing > CallerID, because our production PBX is a Lucent > ArgentBranch, and when dialing out from this the CallerId > displays correct. I've tried some different configurations in > order to get it to work but without luck. > > This is a snip of my extensions.conf > > [Outgoing] > ; > ;Outside access via Zaptel interface (PRI) > exten => _XX.,1,SetCallerId(4330xxxx) > exten => _XX.,2,Dial,Zap/g1/BYEXTENSION > > The main isdn number is 4399xxxx and is the only number I can > get displayed when calling. > > regards > Mickey Binder
I've done some more testing and by debugging the pri span I think I've found where it tries to present the outgoing id. To me everything looks ok but still the only number I see from the outside is my main ISDN number. Here is a couple of lines from the log: Calling Number (len=12) [ Ext: 0 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) Presentation: Presentation permitted, user number passed network screening (1) '4330xxxx' ] Called Number (len=11) [ Ext: 1 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2840xxxx' ] Cant figure out what's wrong? regards Mickey Binder ,E,z&j)b b,E,z%lv("g(mlv("g(Ybا~ڲ.