Your settings are fine. Debug PRI to make sure SETUP message is OK (which probably is) and then check with you PRI provider that callerid is enabled on that PRI - E1.
/Vel -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, January 30, 2006 3:43 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Set caller id on Swedish PRI (euroisdn) Hi, I have a problem with setting outgoing caller id to "nothing" (secret) on our Wildcard TE405P connected to a swedish euroisdn line. Caller ID seems to work fine when connecting the same line to a Ericsson PBX - so something must be wrong in my settings, but I don't know what. I've tried: exten => _*70X.,1,Set(CALLERID(name)="") exten => _*70X.,2,Set(CALLERID(num)="") exten => _*70X.,3,Dial(Zap/g0/${EXTEN:3}|60|T) But the result is always that the caller id is our main number (A-number). Here is an from zapata.conf: [channels] language=se context=from-pstn switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=400 rxgain=1.0 txgain=-4.0 group=0 callgroup=1 pickupgroup=1 immediate=no overlapdial=no channel => 1-15,17-31,63-77,79-93 group=1 channel => 94-108,110-124 group=2 context=from-internal signalling=pri_net channel => 32-46,48-62 Regards, Jan _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users