[EMAIL PROTECTED] is believed to have said: >> While we are at the subject another couple of simple related question. >> >> Are HFC-S cards active? I got one for a very low price, so that I >> imagine it will be NOT the case... > >No, these cards are passive. The protocol handling must be done by >the hosts CPU / driver.
OK; price sometimes tells the truth... >> What cards do support operation of an ISDN phone set? (I imagine there >> will be something similar to the FXS-FXO stuff of the analog world in >> the ISDN land). > >For that you need cards operated in NT-mode. The driver / protocol must >support this, but the card too. >HFC-S cards do as far as I know (I don't know if all do). Fine; I looked into the capi.conf file, but (my lack of knowledge!) I did not understand if there is any setting to tell the driver to operate a card in NT-mode. So, does the newest (which I have anyways to download for the next release of our pbx) capi driver support NT mode? >When talking about active cards, I only know of Eicon cards >supporting this. Well, in the end it's an option to take into consideration. One and a half years ago as I started learning about Asterisk I had an option to buy Eicon cards, but I was unsure about my ability to cope with the complexity of learning the needed bits to get started. So I bought an AVM card.... Today the situation changed somewhat: may be time for the next step. >Armin Thanks a lot Aldo _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users