Alex Ongena wrote:
Hi,
We are using Asterisk 1.2.1 with Cisco 7940 and 7960 phones.
Most things are running fine ;-)
But, when you are calling and you want to Transfer, you need
to press first on the 'more' button (4th), then you have the
label 'Trnsfr' to Transfer.
these are the lables on the softkeys when having a phone call:
"Holt / EndCall / Confrn / more"
press more and you get
"Transfer / / BlndXfr / more"
We do more 'Transfers' than 'Confrn', so I which to siwtch the
2 softkeys on the phone.
Can you do that ?
How ?
Thanks
alex
I went though the same thing. I don't think you can change the menus.
I simply set up Asterisk to Blind Xfer with the "#" key. So instead of
using the softkeys, you hit "#" and then the extension and off the call
goes. It works out nice because if you go to a different phone, the
procedure stays the same.
Mark
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
