On Tue, February 7, 2006 9:53, Sven Fischer said: > Am Dienstag, 7. Februar 2006 09:38 schrieb Sven Fischer: >> Hello all, >> >> if I try to call from one phone on the internal S0 to another on the >> same >> S0 using zaphfc, the bus is hung up. The called phone is ringing, but I >> can't talk from one phone to the other. The error I get is: >> >> -- Executing Dial("Zap/2-1", "ZAP/1/55|15|tr") in new stack >> -- Requested transfer capability: 0x00 - SPEECH >> -- Called 1/55 >> -- Channel 0/1, span 1 got hangup, cause 42 >> -- Zap/1-1 is circuit-busy >> -- Hungup 'Zap/1-1' >> >> The called phone is still ringing, if I have hung up the calling phone. >> I >> have to restart asterisk to get things going again. Calling from SIP to >> the >> phones and calling from phones to external ISDN is working fine. > > Okay, further investigations show that if I connect just one phone to the > NTBA, everything seems to work fine. If I plug in the second phone, the > communication fails. Each phone works if plugged in on it's own into the > NTBA. Termination in the NTBA should be activated, the switches are on. > > Where should I look for errors? Can it be a termination problem if every > phone > works on it's own? > > Sven >
Is the card set up for multipoint use? (BRI_NET_PTMP) -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 Cologne HFC-S pins #52, #54, #55 connected in parallel for synching. AMD Duron 1GHz - 1GB - * 1.2.1 2 Sweex HFC-PCI cards _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users