How about 'show translations' command? This machine doesn't have G.729 codec licenses... AFAIK, this command calculates the cost for each translation...
noc2pbx*CLI> show translation Translation times between formats (in milliseconds) Source Format (Rows) Destination Format(Columns) G723 GSM ULAW ALAW ADPCM SLINR LPC10 G729A SPEEX ILBC 23 - - - - - - - - - - GSM - - 2 2 2 1 13 - - 38 ULAW - 6 - 1 2 1 13 - - 38 ALAW - 6 1 - 2 1 13 - - 38 MP3 - 15 11 11 11 10 22 - - 47 ADPCM - 6 2 2 - 1 13 - - 38 SLINR - 5 1 1 1 - 12 - - 37 LPC10 - 9 5 5 5 4 - - - 41 9A - - - - - - - - - - EX - - - - - - - - - - ILBC - 11 7 7 7 6 8 - - - noc2pbx*CLI> And this machine has G.729 loaded: noc2pbx2*CLI> show translation Translation times between formats (in milliseconds) Source Format (Rows) Destination Format(Columns) G723 GSM ULAW ALAW ADPCM SLINR LPC10 G729A SPEEX ILBC G723 - 62 56 56 56 55 64 106 - 106 GSM 240 - 3 3 3 2 11 53 - 53 ULAW 239 8 - 1 2 1 10 52 - 52 ALAW 239 8 1 - 2 1 10 52 - 52 MP3 258 27 21 21 21 20 29 71 - 71 ADPCM 239 8 2 2 - 1 10 52 - 52 SLINR 238 7 1 1 1 - 9 51 - 51 LPC10 245 14 8 8 8 7 - 58 - 58 G729A 100237 100006 100000 100000 100000 99999 100008 - - 100050 EX - - - - - - - - - - ILBC 247 16 10 10 10 9 18 0 - - noc2pbx2*CLI> Regards, Gus ----- Original Message ----- From: "Tilghman Lesher" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, October 19, 2003 11:44 PM Subject: Re: [Asterisk-Users] use of SIP SHOW CHANNELS question > On Sunday 19 October 2003 21:30, Andrew Kohlsmith wrote: > > > *CLI> show codec 4 > > > No such command 'show codec' (type 'help' for help) > > > *CLI> show audio codecs > > > No such command 'show audio' (type 'help' for help) > > > > Rebuild your system. I had that happen and my Makefile was screwed > > up and didn't actually build any codecs. > > Stop already. The command serves only as a translation table. It does > NOT, repeat NOT, repeat NOT, suggest anything about which codecs > are actually loaded. > > If you actually run this now, you should get the following message on > your console (put there SPECIFICALLY because people were confusing > what the command actually does): > > Disclaimer: this command is for informational purposes only. > It does not indicate anything about your configuration. > > -Tilghman > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users