On 2/14/06, Michael Collins <[EMAIL PROTECTED]> wrote: > Nik, > > I'm not sure that "NOP" is correct, but I'm in the states so I'll to > defer to someone who knows E1/PRI. When I run zttool I have "OK" under > the alarms. Is there a way you can call the telco and confirm the > settings? Make sure that framing, coding and D channels are set up on > their end the same way you're set up. > ok, with your configuration incoming calls works, but:
- i have eco (maybe i have to increase/decrease echotraining value?) - outgoing calls doesn't works ( -- Executing Dial("SIP/102-cc9b", "ZAP/g0/mynumber") in new stack == Everyone is busy/congested at this time (1:0/1/0) -- Executing Goto("SIP/102-cc9b", "s-CONGESTION|1") in new stack -- Goto (macro-dialout-trunk,s-CONGESTION,1) -- Executing NoOp("SIP/102-cc9b", "Dial failed due to CONGESTION") in new stack -- Executing Macro("SIP/102-cc9b", "outisbusy") in new stack -- Executing Playback("SIP/102-cc9b", "all-circuits-busy-now") in new stack ) it seems that i don't have any channel for outbound - ALARM is set on NOP i've got a TE205P and my zaptel.conf is: span=1,0,0,ccs,hdb3,crc4,yellow span=2,0,0,ccs,hdb3,crc4,yellow bchan = 1-15, 17-31 dchan = 16 bchan = 32-46,48-62 dchan = 47 loadzone = it defaultzone = it _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users