A long time ago i tried to make one big iax2 trunk for one of my
customers, i soon changed this to several small trunks. (bandwith doesnt
rise all that much if you use 2 trunks instead of 1.) Asterisk didnt
seem to like my big trunk very much (i don't remember how big it was,
but probably over 100 calls).
Its a very long time ago, maybe some of those issues are resolved by now.
Zoa
trixter aka Bret McDanel wrote:
I am curious if anyone has had problems trunking iax2 with 100+
concurrent calls. I am planning on testing this out tomorrow, however I
wanted to know if anyone else has had a problem with this prior to my
test so I know what to look for if anything is known and what
resolutions have been found if there are any known problems.
Specifically I am doing this on fbsd 6 with asterisk 1.2.4 using g.729
(bandwidth calculators suggest 0.8Mbps used with this setup, compared to
the 2.3Mbps (calculated averaging 2.25Mbps so its close enough). That
is a considerable savings, not to mention that there will be fewer
sends/recvs so hopefully less irq time spent accessing the ethernet
card :)
I am just concerned with packet sizes in call quantities this large, and
other factors.
Anyone that has done this before I would appreciate hearing from you.
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
